Ashish

Tad, Can you verify if the LabVIEW 2009 Run Time Engine is installed properly?

Arne, This article might be helpful: http://support.jki.net/entries/21414632-Issue-with-Installing-VIPM-on-Linux

Arne, Here is link to get the correct Run Time Engine: http://support.jki.net/entries/20959253-LabVIEW-RunTime-Engine-for-VIPM

manigreatus, I was not able to reproduce the behavior described by you. I had configured "Toolkit VIs" to "user.lib" folder: http://screencast.com/t/qxxzDvyIDeQu And, configured the "Source File Settings" to "Toolkit VIs": http://screencast.com/t/PnYerfikGIX If possible, please share the package source that can demonstrate the behavior.

manigreatus, What OS and version of VIPM and LabVIEW are you using? Also, did you set the "Destination" under "Source File Settings" section of VI Package Builder? http://screencast.com/t/dgNCwfCcq4 For dedicated support, contact us at support@jki.net

Nathan, The "jki_lib_easyxml v2.0-1" is actually the evaluation version.

Nathan, I will recommend you to try the EasyXML evaluation version available through VIPM.

Ok. But, are rest of the components installed in the palettes at least? If possible, you can send us the source folder (send email to support@jki.net) to get dedicated support.

Sara, Have you referred to VIPM documentation: http://jkisoft.com/vipm/docs/2012/index.html?turl=editingthepalettes1.htm Here is an article: http://support.jki.net/entries/20674078-editing-the-functions-palette

You will need VIPM API: http://support.jki.net/entries/21395113-VIPM-API

You can programmatically change label for the specific components in the cluster: http://screencast.com/t/CwhtfNmG0

Joachim, I am afraid that you will have to handle this by maintaining clusters for each driver and then using the appropriate cluster at run time.

Balaji, Thanks for the suggestion on having a TortoiseSVN Toolkit API to be able to perform repository operations programmatically. We'll consider it but cannot assure you on when will it be available.

Now....when I read your post carefully, I realized that you are asking for TortoiseSVN API in order to execute the commands programmatically. I am afraid that we do not have that yet. But, I will check with our TSVN Toolkit team for accurate response and get back to you.

Balaji, Here is link to the TortoiseSCN Toolkit documentation: http://jki.net/tortoisesvn-tool/docs

Uninstall existing VIPM. To do this you will have to uninstall VIPM using the VIPM uninstall and then delete the following folders manually: C:\ProgramData\JKI\VIPM C:\Program Files (x86)\JKI\VI Package Manager Then re-download VIPM (http://jki.net/vipm/download) and install it. Try the toolkit upgrade again.

AnandkumarSP, You will have to rebuild the package with updated display information.

AnandkumarSP, Can you send us the source folder at support@jki.net ?

Hi, You will have to contact National Instruments for any support related to NI products. (www.ni.com). This discussion forum is for JKI Products (http://jki.net/products). But, if you are trying to install LabVIEW Run Time Engine for VIPM: - Link for getting correct LabVIEW Run Time Engine: http://support.jki.net/entries/20959253-LabVIEW-RunTime-Engine-for-VIPM - VIPM installation error on Mac: http://support.jki.net/entries/21234937-VIPM-installation-error-on-Mac-OSX-10-7-

Anooj, Thanks for the updates and glad to know that VIPM is up and running on your machine. I will pass on this information to VIPM group for investigation.

Tejas, Can you refer to this article? It is similar to what you have done but there are some instructions for setting Firewall. http://support.jki.net/entries/21447601-Resolving-issues-with-VIPM-connecting-to-LabVIEW Also, did you verify if the TCP/IP ports in LabVIEW match with those in VIPM config?

Austin, This is possible. Please refer this NI site which gives all the info about licensing and trial creation. https://decibel.ni.com/content/groups/third-party-licensing-and-activation-toolkit

We have recorded this bug as Case 13976 for consideration in next release of VIPM.

seanj, The problem might be related to VIPM getting access to the internet. Have you tried to install any other package? Here is an article to resolve network configuration issues: http://support.jki.net/entries/20589198-solving-vipm-network-connection-issues If you need any further assistance, please contact us at: http://jki.net/contact

I think that the "IMAQdx Ref" component in the cluster is causing error. But, to get more accurate help on OpenG, I will recommend you to use this forum on LAVA: http://lavag.org/forum/45-openg/ The JKI Discussion Forum is dedicated for support related to JKI Products: http://jki.net/products